النتائج 1 إلى 5 من 5
  1. #1

    كيفية تحديد المكان عن طريق الجى بى اسى

    السلام عليكم
    توجد اجهزة تقوم بتحديد المكان عايز اعرف ازاى الجهاز يقوم بتحديد المكان
  2. #2
    تاريخ التسجيل
    Mar 2009
    الدولة
    مصر - الأسكندرية
    المشاركات
    36

    رد: كيفية تحديد المكان عن طريق الجى بى اسى

    يكون التحديد نتيجة لأتصال جهاز الجى بى اس بالأقمار الصناعية ومن ثم يمكنه تحديد المكان
    إِنَّ الله لا يُغَيِّرُ مَا بِقَوْمٍ حَتَّى يُغَيِّرُوا مَا بِأَنْفُسِهِمْ
    Eslam.Turki@Gmail.com
  3. #3

    رد: كيفية تحديد المكان عن طريق الجى بى اسى

    اقتباس المشاركة الأصلية كتبت بواسطة إسلام على مشاهدة المشاركة
    يكون التحديد نتيجة لأتصال جهاز الجى بى اس بالأقمار الصناعية ومن ثم يمكنه تحديد المكان
    شكرا على ردك
    بس ازاى يتم اتصال الجهاز بالاقمار الصناعية
  4. #4

    رد: كيفية تحديد المكان عن طريق الجى بى اسى

    اي جهاز جي بي اس يحتوي على حساس (لاقط)لموجات الجي بي اس......اذن فهو ياخذ من القمر الصناعي موجات
    كما فيا لصورة




    There are three types of GPS receivers which are available in today's marketplace. Each of the three types offers different levels of accuracy, and has different requirements to obtain those accuracies. To this point, the discussion in this book has focused on Coarse Acquisition (C/A code) GPS receivers. The two remaining types of GPS receiver are Carrier Phase receivers and Dual Frequency receivers.
    C/A Code receivers

    C/A Code receivers typically provide 1-5 meter GPS position accuracy with differential correction. C/A Code GPS receivers provide a sufficient degree of accuracy to make them useful in most GIS applications.

    C/A Code receivers can provide 1-5 meter GPS position accuracy with an occupation time of 1 second. Longer occupation times (up to 3 minutes) will provide GPS position accuracies consistently within 1-3 meters. Recent advances in GPS receiver design will now allow a C/A Code receiver to provide sub-meter accuracy, down to 30 cm.
    Carrier Phase receivers

    Carrier Phase receivers typically provide 10-30 cm GPS position accuracy with differential correction. Carrier Phase receivers provide the higher level of accuracy demanded by certain GIS applications.

    Carrier Phase receivers measure the distance from the receiver to the satellites by counting the number of waves that carry the C/A Code signal. This method of determining position is much more accurate; however, it does require a substatially higher occupation time to attain 10-30 cm accuracy. Initializing a Carrier Phase GPS job on a known point requires an occupation time of about 5 minutes. Initializing a Carrier Phase GPS job on an unknown point requires an occupation time of about 30-40 minutes.

    Additional requirements, such as maintaining the same satellite constellation throughout the job, performance under canopy and the need to be very close to a base station, limit the applicability of Carrier Phase GPS receivers to many GIS applications.
    Dual-Frequency receivers

    Dual-Frequency receivers are capable of providing sub-centimeter GPS position accuracy with differential correction. Dual-Frequency receivers provide "survey grade" accuracies not often required for GIS applications.

    Dual-Frequency receivers receive signals from the satellites on two frequencies simultaneously. Receiving GPS signals on two frequencies simultaneously allows the receiver to determine very precise positions
    .
    م.نجد جمال الحناحنه

    مهندس جيوماتيكس

    Sr.GIS Engineer
    Pre-Sales GIS Engineer




  5. #5

    رد: كيفية تحديد المكان عن طريق الجى بى اسى

    اقتباس المشاركة الأصلية كتبت بواسطة نجد جمال مشاهدة المشاركة
    اي جهاز جي بي اس يحتوي على حساس (لاقط)لموجات الجي بي اس......اذن فهو ياخذ من القمر الصناعي موجات
    كما فيا لصورة




    There are three types of GPS receivers which are available in today's marketplace. Each of the three types offers different levels of accuracy, and has different requirements to obtain those accuracies. To this point, the discussion in this book has focused on Coarse Acquisition (C/A code) GPS receivers. The two remaining types of GPS receiver are Carrier Phase receivers and Dual Frequency receivers.
    C/A Code receivers

    C/A Code receivers typically provide 1-5 meter GPS position accuracy with differential correction. C/A Code GPS receivers provide a sufficient degree of accuracy to make them useful in most GIS applications.

    C/A Code receivers can provide 1-5 meter GPS position accuracy with an occupation time of 1 second. Longer occupation times (up to 3 minutes) will provide GPS position accuracies consistently within 1-3 meters. Recent advances in GPS receiver design will now allow a C/A Code receiver to provide sub-meter accuracy, down to 30 cm.
    Carrier Phase receivers

    Carrier Phase receivers typically provide 10-30 cm GPS position accuracy with differential correction. Carrier Phase receivers provide the higher level of accuracy demanded by certain GIS applications.

    Carrier Phase receivers measure the distance from the receiver to the satellites by counting the number of waves that carry the C/A Code signal. This method of determining position is much more accurate; however, it does require a substatially higher occupation time to attain 10-30 cm accuracy. Initializing a Carrier Phase GPS job on a known point requires an occupation time of about 5 minutes. Initializing a Carrier Phase GPS job on an unknown point requires an occupation time of about 30-40 minutes.

    Additional requirements, such as maintaining the same satellite constellation throughout the job, performance under canopy and the need to be very close to a base station, limit the applicability of Carrier Phase GPS receivers to many GIS applications.
    Dual-Frequency receivers

    Dual-Frequency receivers are capable of providing sub-centimeter GPS position accuracy with differential correction. Dual-Frequency receivers provide "survey grade" accuracies not often required for GIS applications.

    Dual-Frequency receivers receive signals from the satellites on two frequencies simultaneously. Receiving GPS signals on two frequencies simultaneously allows the receiver to determine very precise positions
    .
    طيب ازاى اقدر اضع حساس (لاقط) مثلا فى موبايل او اى جهاز واقدر احدد مكان الجهاز
    وشكرا على ردك

المواضيع المتشابهه

  1. شرح كيفية اختيار المكان الامثل لبناء احدى المنشات
    بواسطة مهندس مدنى جلال صبرى في المنتدى منتدى برامج وتطبيقات نظم المعلومات الجغرافية
    مشاركات: 28
    آخر مشاركة: 10-12-2011, 01:16 AM
  2. كيف يمكنني تحديد حوض و حساب مساحتة و طول الوادي عن طريق Gis
    بواسطة عبد الله احمد في المنتدى منتدى برامج وتطبيقات نظم المعلومات الجغرافية
    مشاركات: 1
    آخر مشاركة: 03-18-2010, 08:20 PM
  3. الجزء الثاني كيفية إنشاء رتبة للمجري عن طريق Arcgis
    بواسطة محمد الحسن الطيب في المنتدى منتدى برامج وتطبيقات نظم المعلومات الجغرافية
    مشاركات: 7
    آخر مشاركة: 12-28-2009, 01:21 AM
  4. كيفية استخراج حوض النهر من مرئية STRM عن طريق ArcGIS
    بواسطة محمد الحسن الطيب في المنتدى منتدى برامج وتطبيقات نظم المعلومات الجغرافية
    مشاركات: 4
    آخر مشاركة: 06-05-2009, 11:11 PM
  5. طريق المدينة-ينبع الجديد من واقع أجهزة تحديد المواقع
    بواسطة فهد الأحمدي في المنتدى منتدى البيانات الرقمية لنظم المعلومات الجغرافية GIS data
    مشاركات: 2
    آخر مشاركة: 02-10-2006, 04:55 PM

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •