مشاهدة المواضيع

بشاراحمد رد: التغيرات النباتية 09-18-2007,
08:21 PM

د. وسام محمد رد: ماهو الفرق بين (dem) و... 09-19-2007,
11:58 AM

بشير الشمري رد: ماهو الفرق بين (dem) و... 09-19-2007,
12:24 PM

مختار الحسانين رد: ماهو الفرق بين (dem) و... 09-19-2007,
06:04 PM

فهد الأحمدي رد: ماهو الفرق بين (dem) و... 09-20-2007,
04:12 AM

رمضان إسماعيل رد: ماهو الفرق بين (dem) و... 09-20-2007,
06:14 PM

ندى صالح رد: ماهو الفرق بين (dem) و... 09-21-2007,
10:31 AM

شيرين مسلم رد : ماهو الفرق بين (dem) و... 12-17-2007,
07:46 PM

د. سعد الغامدي رد : ماهو الفرق بين (dem) و... 12-18-2007,
07:22 AM

د-متولي عبد الصمد رد : ماهو الفرق بين (dem) و... 01-22-2010,
07:02 AM

عبدالرحمن عرفة رد : ماهو الفرق بين (dem) و... 03-04-2010,
12:20 PM
-
رد : ماهو الفرق بين (dem) و (dtm)
DEM and DTM are used sunonymously in earlier days. But
there are conflicting usage of these terminology. I
could define these two in these ways
DEM - Digital Elevation model can be referred to the
continous representation of change in relief of
terrain (height variations of terrains). Here the
third dimension is the elevation (X,Y,Z)
DTM - digital Terrain model can be defined as a
representation of surface other than the elevations.
ie here the 3rd dimension can be other than the
elevation like rainfall intensity, population density
etc.,
that's whay for GIS personnel, if the 3rd dimension is
the elevation, it is DEM and if the 3rd dimension is
other than the elevation it can be referred as DTM.
For the photogrammetrists (who normally works with the
topography and not the attributes associated with it),
the 3rd dimension will always be the elevation. that's
the reason DEM/DTM is used synonymously.
But now, there are few slight differences been brought
into this for the differentiation of the same.
1. When u say a DEM, it is always a regualr gridded
pattern (referred as 10 x 10 m DEM). If the same DEM,
when supplemented with the breaklines (which indicates
the sudden steep changes in the terrain surface) and
spotheights which still give the best approximations
of the terrain surface can be termed as DTM.
This DTM can contain, the bridge, flyover
representaion also.
As far as LIDAR is concerned, LIDAR as a raw data
gives the complete surface DEM or as it is termed by
LIDAR
ضوابط المشاركة
- لا تستطيع إضافة مواضيع جديدة
- لا تستطيع الرد على المواضيع
- لا تستطيع إرفاق ملفات
- لا تستطيع تعديل مشاركاتك
-
قوانين المنتدى