رد : كيف أدرج بيانات من الأكسل الى arcmap ... ولكن ليس نقاط .... مضلعات ؟؟
الأخ أدهم
يمكنك تحويل النقاط التي لديك من نقاط إلى مضلعات عن طريق تحويل الأشكال من ملفات خطية
Create Features from Text File (Samples)
ممكن تبحث في ملف المساعدة في الآرك ماب على العنوان في الأعلى.
الأمر موجود في
ArcTool Box --> Samples --> Data Management ---> Create Features from Text File
هذا نموذج لكيفية التحويل
Text files that represent polygons should be in the following format: The first line should contain the word Polygon to indicate the geometry type and the structure continues with the id number of the first line, followed by the part number (in case it is a multipart polygon). Point coordinates for the respective part and feature follow. In the case of an interior ring, the word InteriorRing (no space) is written before the group of coordinates. Polygons should be closed, that is, the first and last points should be the same. The final line should contain the word END. Generically, it will look like this:
Polygon
polygon_id part_number
pnt_id x y z m
pnt_id x y z m
...
InteriorRing
pnt_id x y z m
pnt_id x y z m
...
polygon_id part_number
pnt_id x y z m
pnt_id x y z m
...
END
In the example below, there are two polygons. Polygon zero has two parts. The second part has an interior ring. Polygon one is a normal polygon.
Polygon
0 0
0 5.0 5.0 1.#QNAN 1.#QNAN
1 5.0 6.0 1.#QNAN 1.#QNAN
2 6.0 6.0 1.#QNAN 1.#QNAN
3 6.0 5.0 1.#QNAN 1.#QNAN
4 5.0 5.0 1.#QNAN 1.#QNAN
0 1
0 0.0 0.0 1.#QNAN 1.#QNAN
1 0.0 4.0 1.#QNAN 1.#QNAN
2 4.0 4.0 1.#QNAN 1.#QNAN
3 4.0 0.0 1.#QNAN 1.#QNAN
4 0.0 0.0 1.#QNAN 1.#QNAN
InteriorRing
0 1.0 1.0 1.#QNAN 1.#QNAN
1 1.0 3.0 1.#QNAN 1.#QNAN
2 3.0 3.0 1.#QNAN 1.#QNAN
3 3.0 1.0 1.#QNAN 1.#QNAN
4 1.0 1.0 1.#QNAN 1.#QNAN
1 0
0 5.0 3.0 1.#QNAN 1.#QNAN
1 5.0 4.0 1.#QNAN 1.#QNAN
2 6.0 4.0 1.#QNAN 1.#QNAN
3 6.0 3.0 1.#QNAN 1.#QNAN
4 5.0 3.0 1.#QNAN 1.#QNAN
END
لكــل شيء إذا ما تمّ نقــصان ***** فلا يغر بطيب العيش إنسان
هي الأمور كما شاهدتها دولٌ ***** من سرّه زمن سائته أزمــان